Other ways of saving hot water?

Other ways of saving hot water?

1. Take Showers Instead of Baths - An 8-10 minute shower uses 75-150 litres less than the average bath.

2. Upgrade to a Water-Efficient Showerhead - On average, showering and bathing account for 60% of a household’s water bill. So, upgrading to a more efficient showerhead (and taking shorter showers) will cut water bills most. To find a money-saving showerhead, look for one with a WELS rating or 3 or above. A 3-star showerhead uses about 40% less water per minute than a typical 1-star showerhead 

3. Use a Shower Timer to Take Shorter Showers - The most cost-efficient shower is 4 minutes long. If you’re not up for that drastic change yet, aim for just two minutes shorter than your current shower. You’ll hardly notice the change and will still save 20+ litres per shower — over 400 litres per month, per person. You can also halve your shower costs by combining an efficient showerhead with slightly shorter showers. For example, a 10-minute shower with a typical showerhead will use 105 litres, while an 8-minute shower with a 3-star showerhead will use only 50.

4. Wash Laundry in Cold Water - Many clothes require cold washes anyway. Throw in the rest of your laundry with them and save 80% of the energy needed to run a typical warm water cycle.

5. Insulate Hot Water Pipes - The less heat escaping from your hot water pipes, the less unused heat you’ll have to pay for. Insulate them with pipe lagging, especially the two metres closest to your water heater.

6. Set Your Hot Water Thermostat to 60C for Storage - Keeping your stored hot water at a moderate temperature will use less energy than making it remain piping hot. Just remember that to protect your hot water from Legionella, never lower the temperature to below 60 degrees.

7. Let Your Hot Water Take a Holiday When You Do - If you won’t use your hot water for a few weeks, don’t pay to keep it hot. Turn your hot water unit off when you take a holiday; some systems even have a built-in ‘vacation’ setting. Just remember that some off-peak systems will need to reheat overnight when you return. And protect your household from Legionella by heating water up to 60°C for at least half an hour before anyone uses it.

8. Have Your Hot Water System Serviced Regularly - Don’t let regular service checks slide off the radar. Even minor issues in hot water systems compromise their efficiency, and major issues result in costly repairs that preventative maintenance could have averted. Depending on its type, your hot water system should be serviced according to the user manual.

9. Upgrade to a High-Efficiency System - If your hot water system is over 10 years old, it may be nearing the end of its useful life. We recommend that you begin to get quotes for efficient systems now, so that by the time it needs to be upgraded you’ll be well prepared. 
When it’s time to replace it, choose a high-efficiency hot water heat pump or solar hot water model. It will provide the same heating with at least 60% less energy and possibly more. 

10. Assess & Optimize Hot Water Use Before Sizing a New System - Ensure that your new unit is the right size for your household by putting the first 8 tips into practice first. After you’ve reduced your home’s hot water consumption, you may find that your household needs a smaller and less expensive model than you originally thought.

    • Related Articles

    • Hot Water Rebates - NSW

      Overview The NSW Energy Savings Scheme (ESS) provides financial incentives for households and businesses to become energy efficient by cutting electricity and gas use. It does this by making it cheaper to install, improve or replace energy savings ...
    • Hot Water Rebates in SA

      Overview The Retailer Energy Productivity Scheme, REPS (previously REES) provides a discount for energy saving activities including installing HWHP systems and solar electric and solar gas hot water systems. This legislation is due to expire ...
    • Hot water heat pump suggestions

      Both Reclaim and the Sanden models are solid models with longer warranties and great reviews. They use a natural refrigerant (R744 - CO2, GWP < 5)) and are the most silent models, with 37dB. They also both have a high Coefficient of Performance, ...
    • Hot Water Rebates - Randwick NSW

      Overview As part of the Randwick City Council program, properties in Randwick can receive up to a maximum of $2,000/year in rebates for purchasing rooftop solar, rainwater tanks, pool pumps, insulation, or one or more of the other current rebate ...
    • Can I replace the gas backup of my solar hot water with a hot water heat pump?

      Our hot water suppliers have let us know that this is not possible.  The main reason is that the existing hot water system is connected to the existing hot and cold piping for the household and it's not possible to split this piping to go to another ...